Перейти до основного вмісту

Using Cloud Services

Using on-demand services like Sauce Labs, Browserstack, TestingBot, CrossBrowserTesting, LambdaTest or Perfecto with WebdriverIO is pretty simple. All you need to do is to set your service's user and key in your options.

Optionally, you can also parametrize your test by setting cloud-specific capabilities like build. If you only want to run cloud services in Travis, you can use the CI environment variable to check if you are in Travis and modify the config accordingly.

// wdio.conf.js
export let config = {...}
if (process.env.CI) {
config.user = process.env.SAUCE_USERNAME
config.key = process.env.SAUCE_ACCESS_KEY
}

Sauce Labs

You can set up your tests to run remotely in Sauce Labs.

The only requirement is to set the user and key in your config (either exported by wdio.conf.js or passed into webdriverio.remote(...)) to your Sauce Labs username and access key.

You can also pass in any optional test configuration option as a key/value in the capabilities for any browser.

Sauce Connect

If you want to run tests against a server that is not accessible to the Internet (like on localhost), then you need to use Sauce Connect.

It is out of the scope of WebdriverIO to support this, so you'll have to start it by yourself.

If you are using the WDIO testrunner download and configure the @wdio/sauce-service in your wdio.conf.js. It helps getting Sauce Connect running and comes with additional features that better integrate your tests into the Sauce service.

With Travis CI

Travis CI, however, does have support for starting Sauce Connect before each test, so following their directions for that is an option.

If you do so, you must set the tunnel-identifier test configuration option in each browser's capabilities. Travis sets this to the TRAVIS_JOB_NUMBER environmental variable by default.

Also, if you want to have Sauce Labs group your tests by build number, you can set the build to TRAVIS_BUILD_NUMBER.

Lastly, if you set name, this changes the name of this test in Sauce Labs for this build. If you are using the WDIO testrunner combined with the @wdio/sauce-service, WebdriverIO automatically sets a proper name for the test.

Example capabilities:

browserName: 'chrome',
version: '27.0',
platform: 'XP',
'tunnel-identifier': process.env.TRAVIS_JOB_NUMBER,
name: 'integration',
build: process.env.TRAVIS_BUILD_NUMBER

Timeouts

Since you are running your tests remotely, it might be necessary to increase some timeouts.

You can change the idle timeout by passing idle-timeout as a test configuration option. This controls how long Sauce will wait between commands before closing the connection.

BrowserStack

WebdriverIO also has a Browserstack integration built-in.

The only requirement is to set the user and key in your config (either exported by wdio.conf.js or passed into webdriverio.remote(...)) to your Browserstack automate username and access key.

You can also pass in any optional supported capabilities as a key/value in the capabilities for any browser. If you set browserstack.debug to true it will record a screencast of the session, which might be helpful.

Local Testing

If you want to run tests against a server that is not accessible to the Internet (like on localhost), then you need to use Local Testing.

It is out of the scope of WebdriverIO to support this, so you must start it by yourself.

If you do use local, you should set browserstack.local to true in your capabilities.

If you are using the WDIO testrunner, download and configure the @wdio/browserstack-service in your wdio.conf.js. It helps get BrowserStack running, and comes with additional features that better integrate your tests into the BrowserStack service.

With Travis CI

If you want to add Local Testing in Travis, you have to start it by yourself.

The following script will download and start it in the background. You should run this in Travis before starting the tests.

wget https://www.browserstack.com/browserstack-local/BrowserStackLocal-linux-x64.zip
unzip BrowserStackLocal-linux-x64.zip
./BrowserStackLocal -v -onlyAutomate -forcelocal $BROWSERSTACK_ACCESS_KEY &
sleep 3

Also, you might wish set the build to the Travis build number.

Example capabilities:

browserName: 'chrome',
project: 'myApp',
version: '44.0',
build: `myApp #${process.env.TRAVIS_BUILD_NUMBER}.${process.env.TRAVIS_JOB_NUMBER}`,
'browserstack.local': 'true',
'browserstack.debug': 'true'

TestingBot

The only requirement is to set the user and key in your config (either exported by wdio.conf.js or passed into webdriverio.remote(...)) to your TestingBot username and secret key.

You can also pass in any optional supported capabilities as a key/value in the capabilities for any browser.

Local Testing

If you want to run tests against a server that is not accessible to the Internet (like on localhost), then you need to use Local Testing. TestingBot provides a Java-based tunnel to allow you to test websites not accessible from the internet.

Their tunnel support page contains the information necessary to get this up and running.

If you are using the WDIO testrunner, download and configure the @wdio/testingbot-service in your wdio.conf.js. It helps get TestingBot running, and comes with additional features that better integrate your tests into the TestingBot service.

CrossBrowserTesting

The only requirement is to set the user and key in your config (either exported by wdio.conf.js or passed into webdriverio.remote(...)) to your CrossBrowserTesting username and authkey.

You can also pass in any optional supported capabilities as a key/value in the capabilities for any browser.

Local Testing

If you want to run tests against a server that is not accessible to the Internet (like on localhost), then you need to use Local Testing. CrossBrowserTesting provides a tunnel to allow you to test websites not accessible from the internet.

If you are using the WDIO testrunner, download and configure the @wdio/crossbrowsertesting-service in your wdio.conf.js. It helps get CrossBrowserTesting running and comes with additional features that better integrate your tests into the CrossBrowserTesting service.

LambdaTest

LambdaTest integration is also built-in.

The only requirement is to set the user and key in your config (either exported by wdio.conf.js or passed into webdriverio.remote(...)) to your LambdaTest account username and access key.

You can also pass in any optional supported capabilities as a key/value in the capabilities for any browser. If you set visual to true it will record a screencast of the session, which might be helpful.

Tunnel for local testing

If you want to run tests against a server that is not accessible to the Internet (like on localhost), then you need to use Local Testing.

It is out of the scope of WebdriverIO to support this, so you must start it by yourself.

If you do use local, you should set tunnel to true in your capabilities.

If you are using the WDIO testrunner, download and configure the wdio-lambdatest-service in your wdio.conf.js. It helps get LambdaTest running, and comes with additional features that better integrate your tests into the LambdaTest service.

With Travis CI

If you want to add Local Testing in Travis, you have to start it by yourself.

The following script will download and start it in the background. You should run this in Travis before starting the tests.

wget http://downloads.lambdatest.com/tunnel/linux/64bit/LT_Linux.zip
unzip LT_Linux.zip
./LT -user $LT_USERNAME -key $LT_ACCESS_KEY -cui &
sleep 3

Also, you might wish set the build to the Travis build number.

Example capabilities:

platform: 'Windows 10',
browserName: 'chrome',
version: '79.0',
build: `myApp #${process.env.TRAVIS_BUILD_NUMBER}.${process.env.TRAVIS_JOB_NUMBER}`,
'tunnel': 'true',
'visual': 'true'

Perfecto

When using wdio with Perfecto, you need to create a security token for each user and add this in the capabilities structure (in addition to other capabilities), as follows:

export const config = {
capabilities: [{
// ...
securityToken: "your security token"
}],

In addition, you need to add cloud configuration, as follows:

  hostname: "your_cloud_name.perfectomobile.com",
path: "/nexperience/perfectomobile/wd/hub",
port: 443,
protocol: "https",

Welcome! How can I help?

WebdriverIO AI Copilot